New
The Cressi Console CP2 Mini Submersible Pressure Gauge with Compass combines these two instruments in one compact console with an in-line configuration. The textured console boot is easy to handle, even while wearing gloves, and can be rigged with a clip or bungee and secured to the diver's BC for a streamlined profile in the water.
The Cressi mini-manometer submersible pressure gauge (SPG) with luminescent dial reads from 0 to 350 bar. For at a glance monitoring of air pressure the instruments face is divided into three different coloured zones: the area from 50 bar and below is highlighted in Red, with a solid bar and Red stripes. If the SPG is used on Deeper Dives, the Red scale extends and fades to 100 bar, this provides for Added Reserve Air indication required at greater depths. From 50 to approximately 200 bar is Green, and from 150 bar to end of scale is Blue.
The SPG's front glass lens is made to act as a pressure relief valve. In the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape.
The instrument is housed in a small, modern shaped boot, made from polycarbonate and DESMOPAN, (a Thermoplastic Polyurethane) two materials that guarantee protection from shocks and scratches. At the same time, is very lightweight. The pressure gauge housing is durable chrome plated brass. The gauge boot has an attachment point for a clip or lanyard. The pressure gauge is equipped with a 7/16" threaded high pressure hose and is made in Italy.
Also included with the Cressi Mini Pressure Gauge is the Cressi Compass Module. The Compass is a modern instrument that enables easy reading in all conditions. The magnetic compass card moves extensively in all directions, so that reading is accurate even if the instrument is not held perfectly level. The face is luminous and divided into 10 intervals.
Reading can take place by looking at the instrument from above or, more easily, through a Gun Sight an accurate special window that enables more precise tracking of your heading. The Cressi Compass is equipped with a red lubber line for proper orientation. A rotating ratchet bezel with a double pointer for direction makes marking your heading and reciprocal heading quick and easy.
Compass measures 6 cm (2.36") in diameter, is 2.9 cm (1.14") high.
The Cressi Console CP2 Pressure Gauge and Compass is covered by a 24 month limited warranty.
(KC764350)
| SKU | KC764350 |
| Barcode # | 8022983058856 |
| Brand | Cressi |
| Shipping Weight | 1.0000kg |
| Shipping Width | 0.500m |
| Shipping Height | 0.300m |
| Shipping Length | 0.500m |
Help other Mr Dive users shop smarter by writing reviews for products you have purchased.
We'll keep you updated with the latest deals, so that you'll never miss out!
.png)
